Automotive electric water pump for car

Products usage:

1. Hybrid Electric Vehicle (HEV), Extended Range Electric Vehicle (EREV) motor engine and controlling system cooling cycle.

2. Pure electric minibuses motor engine and controlling system cooling cycle, battery auxiliary heating and cooling cycle.

3. Turbocharger cooling cycle.

4. Engine water cooling cycle.

5. 12KW pre-heater water cycle.

6. Other cooling system use.

Main features:

1. Compact structure, convenient installation, reliable performance.

2. Low power consumption, high efficiency.

3. Apply efficient BLDC motor with build-in driver, long service life.

4. Water pumps working state real-time monitoring, locked-rotor alarm.

5. With PWM signal Speed control.

6. Self-controled constant flow.

7. Reverse polarity protection..

8. Dry - running protection.

9. Over-voltage, over-current protection.

10. Overload and overheat protection

11. outer covering protection rank:IP65.

Power supply: Battery supplying

Curves of pump flow, head and power:

Dimensions

Attentions:

1, Working temperature:-40℃--120℃, should try to avoid close to three-element catalytic, gas discharge pipe system and engine during the installation, ensure the working environment temperature.

2, The installation position of the water pump should as much as possible close to the low water level, to extend the service life of the pump.

3, In order to reduce water resistance, should as much as possible to reduce the number of elbow in piping in the installation, ensure no any elbow within 20 cm from the pump.

4, Please use the pump far from the dusty environment, the dust is harmful to reduce the service life

5, Pay attention to the purity of the water, avoid to jam and impeller-blocked to reduce the service life of pump.